How To Explain Double Glazing Door Lock Repairs To Your Boss
How To Explain Double Glazing Door Lock Repairs To Your Boss
Blog Article
Double Glazing Door Lock Repairs
Have you noticed that your uPVC window or door mechanism started to fail? Maybe the handles on your uPVC windows and doors are not aligned properly or are difficult to use.
It is crucial that the double glazed doors operate smoothly, otherwise you'll be wasting energy and increase the likelihood of burglary. Owen the Locksmith will be able to fix your door lock at an affordable price.
Snapped Key
It can be a hassle when a key gets stuck into a lock. It could also be a security issue because it could make you vulnerable to an intruder if the door is not locked. Fortunately, there are quick fixes you can attempt to fix the issue and get your door operating correctly.
Be sure to remain calm. If you get scared and start doing a lot of fumbling around you may end up pushing the broken piece of the key deeper into the lock, making the situation even more difficult.
Spray WD-40 or another penetrating oil, into the lock. This will help the broken piece emerge more easily. You can also use a screwdriver to help break up any pieces stuck that could be hindering the flow. If you're fortunate enough to have a bit of the key that is sticking out, you can use a paperclip or some other metal object that is thin to grab it and pull it out. Both methods work, but be careful not to push the damaged key piece further into the keyway.
Some paperclips have grooved edges that could work in a pinch as a hook extractor and some Jigsaw blades can also be used for this purpose. If you do not have any of these available, you can use needle-nose pliers that bend to create a hook. You can also use a pair tweezers to grab and remove the last bit of the broken keys.
If you are unable remove the broken key piece then you can use a lock deicer. This is usually found in most hardware stores, and it is used to freeze any water or ice that could be inside the lock.
If none of these strategies are working, it might be time to call a locksmith. Fitlocks specialists are able to quickly fix problems with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also reconfigure the double glazing door mechanisms so that they are easier to use. Book a double glazing repair with us online, or give us a call to discuss your needs.
Broken Cylinder
A damaged cylinder could pose an extremely risky security issue. It's fortunately a simple repair for professional locksmiths to complete. A locksmith must tap the cylinder to fix it. This can be done using a hammer or other tool. The best method is to make use of a wire or a long match. Then, place the match's tip or wire near the keyway. The locksmith will then strike the lock to crack it. This is much better than using a heavy hammer that can cause damage to the lock.
The most frequent cause of cracks in the head of a cylinder is due to overheating. This can happen when the cylinder head and block are made from different metals such as cast-iron and aluminum. When various metals heat up and cool down at different rates, it may cause localised hotspots that expand faster than the rest of the cylinder head, leading to cracks.
Corrosion can be a reason for cracks in the cylinder. If the head and block of the cylinder are not maintained properly they may corrosion or rust and cause them to expand faster than anticipated. This can lead to cracks in the future.
If your uPVC door or window lock is brittle or requires an enormous amount of pressure to turn, it can be the result of a number of things. A defective locking mechanism, misalignment, or the wear of the handle are typical reasons for this issue.
It is a quick and affordable fix that the majority of homeowners with double glazing can perform. A professional locksmith should be able solve the issue within an hour of arriving at your property. Based on your requirements they can change the locking mechanism, change the window handles, and change the gearboxes. A professional locksmith will be able to inform you on the most cost-effective solutions for your home. They can even suggest upgrades to the highest-security 3 Star TS007 euro cylinders that will add an extra layer of security against burglars. This is a small price to pay for the peace of mind that comes from knowing your uPVC doors are safe.
Broken Handle
Window handle locks have complex mechanisms that become less effective with time and usage, so it's no surprise they occasionally break. It isn't easy to determine the cause of the problem and then fix it properly.
Repairing your damaged handle, whether it's an internal locking mechanism or latch can increase the security of your uPVC door and reduce the risk of draughts. It could be costly to replace or repair the handle in a way that isn't done correctly. It could also harm the frame and the lock of your door.
With the window in the open position then loosen the screw holding the handle with the screwdriver. This should be located on the inside of the back plate, which is usually concealed by a screw cover for aesthetic reasons. It is important to not lose any internal parts of the handle like the levers and plates on either side. Keep them in the same order so that it is easier to replace if necessary.
Then, turn the handle until it's 90 degrees to the window frame and loosen the screw at the back of the handle that holds it to the internal spindle using a second check here screwdriver. Once the screw is free, you can take the handle off and remove the broken spindle. Replace it with a new one, making sure it's the same length as the old one (you will typically find them online or in hardware stores) and securely screw it in place. Don't over tighten the screw as this could damage the handle and the window frame.
Make sure the new handle is correctly fitted after which you can close and test the handle. Hopefully, it will work smoothly and you'll be able to open your window once more.
While you're working on the handle, be sure to make sure your uPVC windows are shut properly. If they don't close correctly, you could encounter damp or draughts in your home. It could also affect the energy efficiency of your home. Core Sash Windows is a local window company that can adjust the hinges check here of the frames of your windows to ensure that they shut correctly.
Broken Spindle
It is usually the case that the spindle in the handle breaks, rather than the handle itself. This is especially typical in uPVC tilt and turn windows. These kinds of windows require a handle that is a lock mechanism that is located in the frame of the window. The handle is attached to a centre rod that triggers a set of mushroom-like locking cams, these secure the frame of the window. If the dead latch mechanism fails to open when the handle is turned, it is most likely the spindle has been damaged. This can be a frustrating issue.
Luckily, there are ways to fix this problem. A good locksmith can quickly and effectively address this problem. They will be able to remove the window handle using a tool that can remove the wheel component of read more the mechanism, where the spindle is. This can be done without damaging the handle or causing any other damage to the window frame.
Once the wheel has been removed, the technician can examine the spindle to determine what caused it to break. This involves disassembling the spindle and inspecting each component, noting any wear or damage. This process is usually carried out by technicians working in an environment that is clean.
The next step is to clean the damaged spindle. This will remove any debris or dirt that could be hindering it from working normally. The spindle may be repaired or replaced. If it is replaced, the technician can take the here dowel that is similar in size to the original and drill mating holes in both pieces of the spindle. This will ensure that the spindle will fit perfectly with the handle.
If the spindle that is damaged is beyond repair, it may be required to replace it completely. Home centers sell generic replacements, but if your window design is unique, you will have to speak with a cabinet maker or woodworker who can recreate the exact component. double glazed repairs near me Once the spindle has been installed, it is fixed to the handle. Line up the screw holes on the handle to the existing screws in the frame. Once the new handle is in place, you'll be able to operate your uPVC window.